Mitel SX-200 Practices page 760

Hotel/Motel Feature Package Description
I
Room Status Display
Feature Description:
Reference Paragraph 602 2-54,
Programming:
Reference Chart 4-l 9.
Operation:
Chart 5-11 Checking / Changing Status of a Room
(Call RestrWon, Room Occupancy, Room Condition, Maid)
1. .
Press
FUNCTION.
2.
Press the
GUEST ROOM
softkey,
3.
Enter the extension (room) number,
4. Press the
STATUS
softkey.
The STATUS softkev is displayed.
The second line of the display
shows the room's status. For
example,
Status = Vac/Dirty/lnt/Maid
means the room is vacant, dirty, has
internal telephone privileges, and
has a maid in it.
The Room Status softkeys are
displayed. These softkeys change
depending on the status of the
room. For instance, if the room is
dirty, the CLEAN softkey appears. If
the room is clean, the DIRTY
softkey appears,
The second line of the display
shows the room's status.
To Change any Element of the Room Status:
5.
Press the softkey for the desired status. The MORE... softkey returns you to
the previous display.
a
Notes:
1. The status of a room can be checked from an idle console (begin at Step 1 J or while the
attendant is in conversation with the room to be checked (begin at Step 4.).
2. The abbreviations and softkeys used in the display are shown in Table 5-2,
602 5-6 Revision 0 909-096-602-NA
Issue 1