Mitel SX-200 Practices page 232

Features Description
Consoleless Operation
Description
The system may be operated without the use of an Attendant Console.
Under these conditions all features associated with the console are not
available.SUPERSETtelephones may be used as Subattendant posi-
tions. These may switch the system night service (see Night/Day
Switching) and have enhanced call handling and recall capabilities (see
Subattendanq
.
Conditions Some Attendant features are not available at Subattendant positions.
Programming
No
attendant consoles are programmed.
Operation None.
Contact Monitor
Description
Conditions
105 2-160
This feature allows a station line circuit to be used for monitoring an alarm
contact. The contact to be monitored is connected across Tip and Ring of
the circuit. When the contact closes, a call is originated by the station line
circuit and the call is directed to its tenant' s Dial 0 or Priority Dial 0 Rout-
ing Point. The PABX handles the call as a call reroute;see Call Rerouting,
Attendant Access (Dial 0), and Priority Dial 0.
The following conditions apply to this feature:
Contact Monitor is available on OPS, ONS, and analog Line cards.
COS Options 400 (Contact Monitor) and 241 (Receive Only) are mutu-
ally exclusive.
The contact signal is non-latching; if the contact opens, the Dial 0 call
is terminated.
If the station line circuit has COS 239 (Priority Dial 0) enabled then the
Priority Dial 0 Routing point is used.
If there is no Routing point then the origination is still processed(the
station line circuit is now busy) and the station set is given reorder
tone.
If the call is answered at a console, the console display indicates that
the caller is a contact monitor.
Revision 0 9109-096-l
05-NA
Issue 1