Attendant Access (Dial 0) - Mitel SX-200 Practices

Features Descrbtion
l
Press the ENTER softkey.
l
Press the PRIVATE softkey (only if this is to be a confidential number).
l
Enter the desired index number.
9 Press the SET softkey.
9 Press the EXIT softkey.
To view abbreviated dial numbers, enter the following:
l
Press the FUNCTION key.
9 Press the ATT FUNCTION softkey.
l
Press the ABBR DIAL softkey.
l
Enter the desired index number.
l
Press the EXIT softkey.
Attendant Access (Dial 0)
Description
A feature access code (usually 0) is provided for reaching the attendant.
The destination can change based on night/day service. The destination
can be a device type other than a console or LDN. There is also a second
class of dial 0. See Priority Dial 0 in this practice.
The attendant can be reached by dialing:
9 attendant access code (usually 0), which is to a console directory
number,
l
console directory number, or
l
attendant access code which is routed to an LDN key.
Conditions
The following conditions apply to this feature:
-
l
The Attendant Access code can generally be used in the system wher-
ever an attendant individual directory number can be programmed
except in the call rerouting table; this can include Call Forwarding.
l
If there is no feature access code defined, the Dial 0 routing point is
still used by several features.
Programming Assign an access code to Feature 11 (Extension General Attendant Ac-
cess) .
Assign access codes to the Dial 0 entry in CDE Form 19 (Call Rerouting
Table) for the tenant of the caller.
Operation
Dial Attendant Access Code.
105 2-16
Revision 0 9109496-l 05-NA Issue 1