Mitel SX-200 Practices page 696

Hotel/Motel Feature
Packaoe Descriotion
Message Lamp Test
The message waiting lamp on a guest room telephone is tested automatically
whenever the room status changes from occupied to vacant and there .are no
messages waiting. It runs whether the change was made from a front desk terminal or
from an attendant console. However, there is no indication at the front desk terminal
that it has run. If there is a failure, notification is through the alarm icon at the
console.The test verifies lamp operation and confirms that the telephone is still
connected in the room. The test does not verify bell operation.
Feature
Interactions
How to Procvam
How to Use
COS Option 232 (Message Waiting Lamp) and System Option
02 (Message Lamp Test Enable) must be enabled. See the
Programming section,
Chart 4-l 7
Console:
N/A
FDT N/A
602 2-46
Revision 0
9109-096-602-NA
Issue 1