Mitel SX-200 Practices page 155

Features
.
.
.
.
.
.
Press the
Change
softkey.
Press the
Prog
softkey.
Press the No softkey until WHEN SET' S BUSY? appears in the dis-
play.
Press the Yes softkey.
Enter the destination number. If an invalid number is entered, the dis-
play shows INVALID. Use the + softkey to back space and erase
the entry. Enter the correct number (can be a speedcall key, if pro-
grammed).
<
Press the
Save
softkey. The type of forwarding, the forwarding desti-
nation and an * appear momentarily in the display. The display then
returns to showing the date and time. Call Forwarding is now pro-
grammed and enabled.
Note: The asterisk indicates that Call Forwarding is enabled.
SUPERSET DN and SUPERSET 430 Telephones:
To display the current forwarding type and destination (split forwarding
disabled):
.
Press
SuperKey.
Find the
Forwarding
softkey. (Use the
More
softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed (split forwarding disabled):
l
Press the
Turn FWD On
softkey. <FWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding (split forwarding disabled):
9 Press the
Turn FWD Off
softkey. cFWD ON> disappears from the dis-
play.
To set up Forwarding - Busy (split forwarding disabled):
.
.
9109-096-l 05-NA
Issue
1
Press
SuperKey.
Find the
Forwarding
softkey. (Use the
More
softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press the
Change
softkey. Softkeys appear for the types of forwarding
enabled in the set' s COS.
Select Call Forwarding - Busy. The display requests the destination
number.
Revision
0 105 2-83