Mitel SX-200 Practices page 916

ACD TELEMARKETER
Application Package
Table A-l Programming Error Messages
(continued)
Error Message Meaning
ONS Port access code XXXXX does
The access code entered for the Alternate Music Source
not exist
Between Recordings, or Music Source Following a Recording
is non-existent or illegal.
Option XXX conflicts with this option
Only one of the ACD COS options (ACD agent, ACD
supervisor, ACD senior supervisor) can be enabled in the
\
same COS.
Option 41 must be enabled
Option 41 (Automatic Call Distribution) must be enabled
before this option can be enabled.
Option 44 must be disabled
The user is attempting to disable Option 41 (Automatic Call
Distribution).
Printer(s) busy, try later Printers are programmed, but the system cannot find at least
one that is idle.
Recording access code XXXXX does
The access code entered for a recording is non-existent or
not exist
illegal. The code must be for a recording hunt group.
Start time of a recording must be <
Adjust the start time as indicated.
Interflow Timeout
Start time of a recording must be <
start time of the neti recording
Adjust the recording start times as indicated.
Start time of recording must be > start
Adjust the recording start times as indicated.
time of the previous recording
Supervisor XXXX does not exist
A Supervisor with ID XXXX cannot be displayed, as
requested via the FIND SUPER key, because this access
code has not been assigned to a supervisor.
Template number must be in range
P3
The template number is out of range.
The access code XXXX is already
assigned
In the Paths form the error is: The access code entered for
this ACD Path is already assigned elsewhere in the
database.
In the Supervisor form the error is: The ID code which has
been inserted into the main form or the subform already
exists in the database. (It could exist as another supervisor,
senior supervisor, agent, or any other device.)
In the subform this error occurs if the user specified a
different name or COS than was previously entered for this
supervisor.
The agent group XX does not exist
The specified agent group does not exist in the data base.
The maximum ACD positions allowed
The maximum number of ACD positions is 999, which
are already assigned
includes all position types.
The SUPERSET has a BLF module
The COS being assigned to the set, which has a
SUPERSE7
and camtot have a COS with a key
DSS Module associated with it, has a key template enabled.
template
Page 4 of 5
620 A-4
Revision 0 9109-096-62O-NA Issue 1