Mitel SX-200 Practices page 123

Features
A party that is on consultation hold at the console does not hear system
music.
See Attendanf Call Splitting And Swapping.
Conditions
This softkey only appears when the Attendant Console is connected to a
multi-party call and the destination party can be put on Consultation
Hold.
Programming
None. ;
Operation
Press the SOURCE softkey -the console is connected to the source
party and the destination party is put on Consultation Hold.
Attendant Timed Recall
Description
This feature automatically alerts the Attendant when a call extended
through the console or a call held at the console has not been answered
within the preselected time.
Selectable recall times include:
1 COS Option 1
Name
I
Timer Range 1
I
115
Attendant-Timed Recall - No Answer
5to24os
(0 = disable)
I
I
116
1 Attendant-Timed Recall - Hold
I
10to240s
I
I
117
Attendant-Timed Recall - Campon
5to240s
(0 = disable)
I
For full details of Recall, see Recall. Also see Attendant Transparent
Mu&console Operation.
Conditions
The following conditions apply to this feature:
l
A value of 0 for COS Optionsl15 and COS Option11 7 disables the Re-
call; however, the final ring timeout applies,
l
Recalls to the console are inoperative during Night Service unless the
console is the night answer point.
Programming
Select the desired recall times for COS Options 115 (Attendant-Timed
Recall - NO ANSWER), 116 (Attendant-Timed Recall - HOLD), and 117
(Attendant-Timed Recall - CAMPON), in the Attendant console's COS.
9109-096-105-NA
Issue1
Revision 0
105 2-51