Addheld - Mitel SX-200 Practices

Features
Add Held
Description
Add Held allows a user engaged in an active call on a SUPERSET4, a
SUPERSET 4 DN, a SUPERSET 420, or a SUPERSET 430 telephone to
add a call that is on hold on another line to the current line.
Conditions
The following conditions apply to this feature:
l
This feature is applicable to SUPERSET4, SUPERSm4 DN,
SUPERSET 420, and SUPERSET 430 telephones only.
l
The set must have, in addition to its prime line, an appearance of
another line.
0 A private trunk line cannot be added into an established call.
l
The feature can be used to add parties into conference calls or to
transfer calls in progress to continue on another line.
l
A conference on hold on a line cannot be added.
l
The party doing the add held must not have a consultation hold in
progress and must not be talking to a third party.
l
The console cannot be involved in the call being added to.
l
The line being added to can be a private trunk line only if dialing on the
line (there can be no established call on the line).
l
There must be less than five patties in the current call.
l
The current call must not be on consultation hold.
l
There must be no other parties in the current call performing an add
held at the same time.
Programming
Enable COS Option 302 (Flash in Conference) in the set's COS to allow it
to add a held line while talking to another party.
Operation SUpERsET Telephones:
l
Establish a call, with a call on hold on another line.
0
Press the
Addheld
softkey. SELECT HELD LINE appears in the dis-
play-
l
Press the flashing line key of the call on hold. The call on hold is add-
ed to your current call.
SUPERSET4, SUPERSET
4 DN, and
SlJPERSET430
Telephones:
l
Establish a call, with a call on hold on another line.
9109-09&l 05-NA
Issue 1 Revision 0 105 2-9