Mitel SX-200 Practices page 770

Hotel/Motel Feature Package Description
5. For 12-hour formats, press the PM softkey if
Any time entered in the 12-hour format
you are setting an afternoon time. is assumed to be morning time unless
the PM softkey is pressed.
A 24-hour setting is accepted as valid
in the 12-hour format. It is
automatically converted to 12-hour
format
The AM/PM softkey toggles between
AM and PM. AM is the defauft.
To Correct an Error:
6.
Use the Delete hardkey to delete the last digit
of the time (digit by digit).
7.
To cancel a Change to the Wakeup Tlme:
If you are setting the wakeup time and decide
You must have entered the complete
not to, press the Cancel softkey.
time (the full four digits).
The shade bar moves to the next
6.
programmable field, and leaves the
wakeup field unchanged.
To continue making changes, press the Return
hardkey.
To end, press the Enter softkey.
Notes: 1 When the highlight bar is in the Wakeup field on the Room Update screen, the Set
Wakeup softkey appears. If a wakeup time has already been set, a Set Wakeup and a
Clear Wakeup softkey appear.
Once four digits are entered, Cancel,
Enter, and AM/PM softkeys (if the
12-hour clock option is enabled)
appear.
The prompt Press Enter to confirm
Wakeup Time appears.
2. If a wakeup is set or changed by the front desk terminal, and the system option
s
to print these changes has been enabled, a SIT BY DESK or CHG BY DESK
message is printed to indicate how the change was made.
Chart 6-22 Cancelllng a Wakeup Call
I.
2.
On the Room Update screen, move the shaded
The wakeup is cleared. The shade
bar to the wakeup field and press the Clear
bar moves to the next field that can
Wakeup softkey.
be modified.
To continue making changes, press the RETURN
hardkey.
To end, press the Enter softkey.
Note: When a wakeup time is set, a Clear Wakeup softkey is displayed.
602 5-18
Revision 0
909-096-602-NA
Issue 1