Mitel SX-200 Practices page 733

Programming Hotel/Motel
Chart 4-2 Programming for PMS
(continued)
Step Action Comments
Define the Data Circuit
3. Form 11: Define a data circuit descriptor to The PMS documentation has further details:
match the W-232 interface of the PMS in
CDE Form 11 (Data Circuit Descriptor
Options Subform).
A typical R!S-232 interface for the PMS port
is:
7 ASCII data bits :
No parity
One stop bit
1200 baud.
4. Form 12: Define the data circuit used for Described in Practice 9109-096-21 O-NA,
connection to the PMS in CDE Form 12
Customer Data Entry.
(Data Assignment).
Form 19 ( Dial 0 calls j
5. If Dial 0 calls are routed for a guest room, These can be the same number,
program Form 19. Enter Day, Nl and N2.
The Dial 0 point must be a console, a
console LDN or subattendant LDN.
Note: If Day, Nl and N2 numbers are not
provided, it is impossible to set message
waiting from the PMS terminal. However, it
can be done from the attendant console.
6. Form 34: Configure the dataset port for PMS Described in Practice 9109-096-21 O-NA,
application in CDE Form 34 (Directed l/O). Customer Data Entry.
Page 3of 3
9109-096-602-NA
Issue 1
Revision 0 602 4-13