Mitel SX-200 Practices page 177

Features
To
.
.
.
deactivate Forwarding:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press
the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
To Set Up or Modify Call Forwarding - External:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until the required type is displayed; then press the YES softkey.
Press the SPEED CALL key associated with that number on the SUPERSET
telephone or associated SUPERSET DSS Module, or dial the Abbreviated
Dial number, if available.
l
Check that the destination number indicated on the display is correct.
To correct an error, use the + key.
l
Press the SAVE softkey.
SUPERSET 420
Telephones:
To display the current forwarding type and external destination:
l
Press
SuperKey.
-
Press the No softkey until CALL FORWARDING? appears in the dis-
play*
l
Press the Yes softkey. The display shows the current forwarding type
and external destination, if programmed.
* Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
.
Press the CALL FORWARD Feature key. The indicator beside the key
turns on to indicate that Call Forwarding is activated. (Refer to Feature
Keys for instructions on programming this feature key)
or, if a CALL FORWARD Feature key isn' t programmed,
Press
SuperKey.
Press the No softkey until CALL FORWARDING?
play.
Press the Yes softkey.
appears in the dis-
9109496105-NA
Issue1
Revision
0 105 2-105