Mitel SX-200 Practices page 597

Appendix I3 - Data Account Codes
For an internal call via the modem pool or for an incoming TIE or DISA trunk call, once
the trunk has been seized, the account code access code and the account code
number are entered prior to the destination digit string.
75-2222-l 234-l 862 (internal modem pooling call with account code)
75 - account code access code
2222 - 4-digit account code number
1234 - modem pool access code
1862 - destination data station
Incoming Call over Special DISA Trunk
In order that the special DISA caller has access to the PABX, an Account code without
an Account Code Access code must be dialed as a security code.
Other Calls Applying Account Codes:
. An Account Code access code must be dialed prior to the account code number.
l
Dial account code digits.
If the account code is a variable length, the digit string must be followed by a #. If the
digit string has reached the maximum of 12 digits, the caller has the option of either
entering the # delimiter or leaving it out.
A non-variable length account code must be programmed with the account code length
between 4 - 12 digits.
l
For a non-DTRX or non-ADL call, the PABX supplies dial tone after a correct ac-
count code has been dialed.
System Abbreviated Dial Numbers
B.4
The system abbreviated dial number for an ADL caller may include an account code.
e
EXAMPLE:
System Abbreviated Access Code + System Abbreviated Number =
ADL Access Code + Account Code Access Code + Account Code Number +
Destination Number
or
Account Code Access Code + Account Code Number + Destination Number
For DTRX callers, the Account Code cannot be included in system abbreviated
numbers.
9109-096-221-NA
Issue1
Revision 0
221 B-3