Mitel SX-200 Practices page 165

Features
returns to showing the date and time. Call Forwarding is now pro-
grammed and enabled.
Note:
The asterisk indicates that Call Forwarding is enabled.
SUPERSET
DN and SUPERSET Telephones:
To display the current forwarding type and destination:
Find the
Forwarding
softkey. (Use the More softkey). ;
Press the
Forwarding
softkey. The display shows the current fotward-
ing type and destination, if programmed.
To activate Forwarding already programmed:
l
Press the
Turn WD On
softkey. &VVD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the
Turn FWD Off
softkey. <FWD ON> disappears from the dis-
play.
To Set Up Forwarding - Follow Me:
.
Press
SuperKey.
Find the
Forwarding
softkey. (Use the More softkey).
Press the
Forwarding softkey.
The display shows the current forward-
ing type and destination, if programmed.
Press the
Change
sofikey. Softkeys appear for the types of forwarding
enabled in the set' s COS.
Select Alwavs~
The disnlav reauests fhe &&in&ion number
' - _.__._ ""_,"
. .._ -.-r.-, .-1 _____
Enter the destination number. If an invalid number is entered, the dis-
play shows INVALID NUMBER. Use the rC softkey to back space
and erase the entry. Enter the correct number (can be a speedcall key,
if programmed) or press the Current No. softkey to restore the pre-
viously programmed destination, if available (only available when the
current forward destination is anything but a speedcall).
Press the
Save/On
softkey. The display returns to normal. <FWD ON>
appears in the top right corner.
9109-096-l 05-NA
issue 1
Revision 0
105 2-93