Auto-Hold - Mitel SX-200 Practices

Features Descriction
l
Dial the Auto-Answer feature access code, followed by the digit "1". If
a feature key has been programmed, the adjacent LCD indicator dark-
ens.
To deactivate Auto-Answer for Directed Page Calls:
l
Press the AUTO-ANSWER feature key. The adjacent LCD indicator
clears, or,
l
Dial the Auto-Answer feature access code, followed by the digit "2". If
a feature key has been programmed, the adjacent LCD indicator
clears.
;
Auto-Hold
Description
A SUPERSETtelephone user automatically places a call on hold when
another Line Select or Speedcall key on the telephone is pressed. When
this is not desirable, a COS option can be programmed which allows a
call to be placed on hold only by pressing the HOLD key.
Conditions
The following conditions apply to this feature:
l
Auto-Hold is not available on SUPERSET telephones or on Indus-
try Standard Telephones.
l
When this feature is disabled, calls can only be placed on hold by
pressing the HOLD key.
9 See Holdfor conditions on putting a call on hold. If the hold is not al-
lowed then the Line Select or Speedcall key is ignored.
. When this feature is disabled, and another line is selected, the call on
the current line is dropped.
l
The auto-hold only occurs when a Line Select key is pressed while
dialing or talking, or when a Speedcall key is pressed while talking.
l
If a Line Select key is pressed when dialing, if there is a consultation
hold in progress then that party is automatically placed on hold.
Programming
Enable COS Option 601 (SUPERSET- Auto-Hold Disable) to disable the
Auto-Hold feature.
Operation
Establish a call.
Press any Speedcall key or Line Select key; the call is placed on hold, If a
Speedcall key is pressed, the system prompts for a line to use to start the
Speedcall call.
105 2-60
Revision 0
9109-096105-NA Issue1