Mitel SX-200 Practices page 674

Hotel/Motel Feature Package Description
Feature Description
2.4
The following is a description of each of the Hotel/Motel features. Where possible,
features have been associated into groups. For example, the various types of audits
are described under the main heading Audits.
Attqdant Message Waiting Setup and Cancel
A message waiting indication can be left for a guest room. The setting and clearing of
,a message waiting indication can be recorded on a system printer. A single-line report
can be generated, giving the room number, date, time and status change, and who
changed it. See Single-Line Reports.
How fo Pfogfam
Chart 4-3
How fo Use Console: Chart !5-1
FD-lY
Chart 5-l 7
A message waiting indication on a guest room telephone can be:
Guest Room Message Retrieval
- a message on the display of a SLJPERSET 4, SUPERSET 4DN, SUPERSET 420
or SUPERSET 430 telephone,
- a continuously flashing lamp (if equipped) on the telephone. (The SUPERSET4DN,
SUPERSET 3DN, SLJPERSET 401, SUPERSET 410, SUPERSET 420 and
SUPERSET 430 have a message lamp.)
- a distinctive
ringing pattern (three short bursts every 20 minutes). The telephone
rings with this distinctive ringing pattern if the extension has been busy, or has Do
Not Disturb set, or until message waiting is cancelled.
The Cancel softkey on a display SUPERSfltelephone can cancel message waiting.
Telephones with no softkeys must call the attendant to retrieve the message. It is then
cancelled by the attendant. See also Message Lamp Test.
How fo Program
Chart 4-3
How fo Use Any set Chart 5-36
602 2-24 Revision 0 9109-096-602-NA
Issue 1