Mitel SX-200 Practices page 254

Features Description
ADL from SlJPERSET4 Telephones:
The set calls a busy data device:
l
The set receives Special Busy tone. The display shows " B USY" . The
CAMP ON softkey appears.
l
Press the CAMP ON softkey within IO seconds. The display shows
" C AMPING 0N" w hile the set is queued.
-ADL from SUPERSET Telephones:
The set calls a busy data device:
The set receives Special Busy tone. The display shows " B USY' . The
Wait
softkey appears.
Press the
Wait
softkey within 10 seconds. While the set is queued, the
display shows the extension number of the busy data device followed
by the " W AITING" prompt (e.g., 4410 WAITING).
ADL from
SUPERSET
DN and
SUPERSET 430
Telephones:
The set calls a busy data device:
9 The set receives Special Busy tone. The display shows " B USY' . The
I
Will Wait
softkey appears.
l
Press the
I Will Wait
softkey within IO seconds. The display shows
' WAITING FOR" and the extension number while the set is queued.
DTRX
Queuing is automatic. The originator receives the message " C all
Queued" .
is
Data Transceiver (DTRX)
Description
The Data Transceiver (DTFIX) allows the data user to set up a data call
from a data terminal (DTE). The system has four DTRX channels; four
users can communicate with the DTRX simultaneously. When the re-
quested call is established, the DTPX is dropped, making it available for
other data callers.
This feature is not available in Generic 1001.
Users requesting a busy destination are queued until the destination is
available. Up to 20 callers can queue. Subsequent callers requesting busy
destinations are sent the message " S ystem Busy, Try Again Later" .
105 2-182
Revision 0
9109-098-l 05-NA
Issue 1