Mitel SX-200 Practices page 962

Automated Attendant Application Package
If the user has not filled in a value for System Option 59, Receivers Reserved For
Non-Auto-Attendant Feature Use, they are not permitted to create an Auto-Attendant
group. When the ENTER key is pressed to change the group type, the following error
message appears:
System Option 59 must be programmed before creating an Auto-Attendant group.
The user must return to the System Options form and program a value for Option 59.
The ~group type cannot be changed from AUTO ATT to some other group type unless
all of the RADs in the group are either DND, busiedout or idle. Once the group type
is set, the OPTION softkey is used to set up options on the group. The options for
'Automated Attendant groups only appear if the group type is
AUTO An.
The fields on the Auto-Attendant group form are described below. Default values are
also shown. To change information in the fields, scroll to the desired field and,
depending upon the field, either enter the desired value or press the appropriate
softkey:
Name:
Enter the name string (the same rules apply as for recording groups).
Default: No name.
Message Length:
Enter the message length time in minutes and seconds (the same
rules apply as for recording groups). Default: message length = IO seconds.
Default Destination:
Enter an access code. The access code must be already
assigned to a valid destination. Default: No default destination.
Dialing Over Recording:
Select the DISABLE or ENABLE softkey that is to appear
when the Dialing over Recording field is in the scroll window.
Default: Dialing over recording enabled.
Prefii Digits:
Enter the digit string, containing 0 to 4 digits. Valid digits are O-9, * and
#. Default: No prefix digits.
Wait For Resources:
Enter the time to wait in minutes and seconds (0O:OO to 54:OO).
Default: Wait for resources = I minute.
e
.lf the group type is changed, all of the above information is deleted if the information
no longer applies to the new group type. "Name" is never lost and "Message Length"
is not lost if the new group type is RECORDING.
625 4-2
Revision 0 9109-096-625-NA Issue 1