Mitel SX-200 Practices page 692

Hotel/Motel Feature Package Description
Maid in Room
This feature allows the maid to enter a oode from the guest room telephone to indicate
that the room is currently being cleaned. Upon leaving the room, the maid ca,n enter
a second code indicating that the room is ready for inspection or that it is clean. See
Table 2-l 4.
Table 2-14 Maid in Room
Code Maid in Room Status Meaning
1 Maid is in room Maid has entered the dirty room and has
dialed the room access code and the maid in
room code.
2 No maid in room Maid has decided to leave the dirty room after
dialing in the Maid in Room code. Room has
not been cleaned. Maid has dialed the room
access code and the no maid in room code.
3 Room clean, maid not in room The room is clean. If there is a supervisor,
supervisor dials this code to indicate room
has been inspected and is ready to be rented
out. If there is no supervisor, maid dials this
code to indicate room is clean and is ready to
be rented out. Maid or supervisor has dialed
the room access code and the room clean
code.
4
Room to be inspected, maid not in Maid has finished cleaning the room, The
room room is ready for inspection by a supervisor.
Maid has dialed the room access code and
the room to be inspected code.
The attendant console or the front desk terminal can display this information. A
SWB?SETtelephone with the proper COS option can also display this information. See
Maid in Room Status Display on page 602 2-45. If the maid in room status changes
e
for a room currently in room update mode, the new status is not posted until the current
display (room update screen on the front desk terminal, or current display on the
'attendant console) is exited and reentered. See Table 2-15.
602 2-42
Revision 0 9 109-096-602-NA
Issue 1