Mitel SX-200 Practices page 723

Programming Hotel/Motel
Chart 4-l Programming the Hotel/Motel Application
(continued)
Step Action Comments
Form 03: To Program Room Types (Front
The hotel guest rooms can be divided into
Desk Terminal)
50 groups. This is done by putting each
.~
room type into a separate COS Each COS
has a name associated with it. Therefore,
the room type can be identified by the COS
name.
2. Create a COS for each different room type For instance,
you have, Assign a name to it by using the COS I SINGLE single rooms
COS Name softkey. COS 2 DOUBLE double rooms
COS 3 NONSMOKS nonsmoking single
COS 4 NONSMOKD nonsmoking double
The name must be:
-unique
-up to eight characters in length
Define the Characteristics of each Room
3.
On each Form 03 you have, set the COS
options for each type of room. Enable:
101 Attendant (Console only) OG
Allows console to access room status
Restriction/Room Status Setup (occupancy, condition, call restriction). It
provides the STATUS softkey to the console.
Note:
The front desk terminal always has
access to room status. Only System Option
33 on Form 04 has to be set.
105 Attendant (Console only) Guest
Attendant Console.
This COS option gives
Room Key access to the Hotel/Motel features from an
attendant console. This does not have to be
set for the front desk terminal.
113 Attendant (Console only) Call Block
W
202 Alarm Call
Attendant Console.
This COS option
allows the attendant to inhibit room-to-room
calls. COS option 204 and System Option 09
must also be set. This does not have to be
set for the front desk terminal.
Room Telephones.
This COS option allows
guests to set up a wakeup alarm call from
their extension. It also allows the console or
the front desk to set up wake up calls for
guest rooms. See also COS option 244,
Page 2 of 9
9109-096-602-NA
Issue 1 Revision 0 602 4-3