Mitel SX-200 Practices page 173

t
Features
returns to showing the date and time. Call Forwarding is now pro-
grammed and enabled.
Note: The asterisk indicates that Call Forwarding is enabled.
SUPERSET
DN and SUPERSET Telephones
To display the current forwarding type and destination:
.
Press SuperKey.
Find
the
Forwarding softkey. (Use the More softkey).
;
Press the
Forwarding softkey. The display shows the current forward-
ing type and destination, if programmed.
Press
SuperKey to return to normal display.
To
activate Forwarding already programmed:
l
Press the Turn FWD On softkey. <FWD ON> appears in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the Turn FWD Off softkey. cFWD ON> disappears from the dis-
play.
To Set Up Call Forwarding - Don' t Answer:
.
Press SuperKey.
Find the Forwarding softkey. (Use the More softkey).
Press the Forwarding softkey. The display shows the current forward-
ing type and destination, if programmed.
Press the Change softkey. Softkeys appear for the types of forwarding
enabled in the set' s COS. This only applies if Split Forwarding is dis-
abled.
Select Call Forwarding - Don' t Answer. The display requests the desti-
nation number.
Enter the destination number. If an invalid number is entered, the dis-
play shows INVALID NUMBER. Use the+ softkey to back space
and erase the entry. Enter the correct number (can be a speedcall key,
if programmed) or press the Current No. softkey to restore the pre-
viously programmed destination, (if available).
Press the Save/On or Save/Off softkey. The display returns to normal.
&W/D ON> appears in the top right corner only if either internal or ex-
ternal forwarding is enabled.
9109-096-I 05-NA
Issue 1
Revision 0
105 2-101