Mitel SX-200 Practices page 188

Features Description
.
.
.
.
a
.
.
105 2-116
Forwarding is ignored when callbacks are honored, except No Answer
forwarding is performed if it is programmed and enabled.
No forwarding is done if the caller is the Attendant, and the forwarding
destination is the Dial 0 Access Code.
If the extension is a member of a Hunt Group and has forwarding en-
abled, the system excludes it from hunting.
Only one type of forwarding may be active at an extension at any time:
if an extension has one type of forwarding active and the user enters a
new forwarding type, the first type of forwarding is canceled.
,
Forwarding must be enabled in the set' s COS. The different types of
forwarding are enabled separately; see
Programming.
A call may be forwarded twice if the first forward is of the " F ollow Me"
or " B usy" type, and the second is of the " D on' t Answer" type. Other-
wise a call can be forwarded only once.
An extension must have COS Option 245 (Abbreviated Dialing Ac-
cess) in its COS to be able to program call forwarding to system
Abbreviated Dial numbers. The option is not needed for callers which
are forwarded to abbreviated dial numbers.
When forwarding to a speedcall or abbreviated dial number, the for-
warding always occurs regardless of the outcome of the call, unless to
a vacant number, in which case forwarding is ignored. For example, if
Toll Control denies access to an external number or the forwarding is
to an invalid number then the caller receives reorder tone.
SUPERSETtelephone key or multicall line appearances of extension
numbers do not ring or provide visual indication of incoming calls if the
extension has activated Forwarding - Follow Me, Forwarding - Busy,
or Forwarding - I' m Here.
Forwarding is not done if the forward destination is busy (it is busy if:
Do Not Disturb is activated, it is not idle, or its prime line appearance is
not idle). An exception is for Subattendant SUPERSETtelephones.
For Subattendants, the SUPERSETtelephone is considered busy if
there are no idle appearances of its prime line; see
S&attendant (Ge-
neric 1001, 1002, and 1003).
When Call Forwarding - Follow Me is activated, calls are always for-
warded, even if the forward destination is busy.
If the SUPERSETtelephone being forwarded to has the Auto-Answer
feature activated then the caller is answered with that feature; see
Au-
to-Answer.
Connection checking is done between the calling party and the party
being forwarded to; see
Device interconnection Control.
If forwarding is activated but for some reason the forwarding is not
done, the call continues as if forwarding was not active. If the call for-
ward -don' t answer timer expires and no forwarding is performed, the
recall no answer timer is started; see
Recall.
Revision 0 9109-096-l 05-NA
Issue 1