Mitel SX-200 Practices page 158

Features Description
105 2-66
l
Press the CALL FWD softkey - read the display.
l
Press the EXIT softkey.
To activate Forwarding already programmed:
.
.
. .
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
;
Note:
A Feature Key may be used here instead.
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
To deactivate Forwarding:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
Note:
A Feature Key may be used here instead.
To Set Up or Modify Call Forwarding - Busy/Don' t Answer:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed,
Repeat until Call Forwarding - Busy/Don' t Answer is displayed; then press
the YES softkey.
To forward the call within the PABX:
l
Dial the forwarding destination number.
l
Check that the number on the display is correct.
- To correct an error, use the 4 key.
l
Press the SAVE softkey.
SUPERSET Telephones:
To display the current forwarding type and destination:
l
Press SuperKey.
Revision 0 9109-096-I 05-NA
Issue 1