Mitel SX-200 Practices page 209

Features
calls, depending upon the software generic (see conditions).
SUPERSET DN or SUPERSET telephone users can view the calling
party identity on the LCD display, and decide if it is to be forwarded or not,
rather than having the system forward it automatically.
Conditions The following conditions apply to this feature:
In Generic 1002 and Generic 1003, this feature is only available to
SUPERSET and SUPERSET DN telephones.
In Generic 1004, this feature is available to SUPERsET4,
SUPERSET DN and SUPERSET DN telephones.
In Generic 1005 this feature is available to SUPERSET 4,
SUPERSET DN, SUPERSET DN, SUPERSET410, SUPERSET
420, and SUPERSET 430 telephones.
This feature will apply to telephones which have forwarding pro-
grammed, but not enabled, or have Call Forward No Answer
programmed.
The conditions which apply to Call Forward - No Answer also apply to
this feature.
The feature applies only to prime line (or intercom line) calls, and only
to calls which can normally be forwarded (i.e., not callbacks or wake-
ups, etc.).
Programming
The following programming is required:
For SUPERSET DN, SUPERSET DN, SUPERSET410,
SUPERSET 420 and SUPERSET 430 telephones, program call for-
warding as described in Call Forwarding.
To activate this feature from a SUPERSET DN, SUPERSET470, or
SUPERSET telephone, you must program a FORWARD CALL
feature key. (See Feature Keys.)
Operation To forward a ringing call:
SUPERSET
DN and SUPERsET Telephones:
.
Press the FORWARD CALL feature key.
SUPERSET 420
Telephones:
l
Press the
Forward
softkey.
SUPERSET 4 DN and SUPERSET Telephones:
l
Press the
Forward Call
softkey.
9109-096-l
OS-NA
Issue 1 Revision 0
105
2-137