Mitel SX-200 Practices page 683

System Description
Table 2-11 Automatic Wakeup
Terminal Description Display
Mtendant Set, wakeup and clear functions are available on
Console
Wakeup time is displayed on
softkeys. In each case, a printout automatically the console's status line:
occurs at the associated printer if the system option
to print these changes has been enabled, If system
Wakeup = 09:35
time is in 12-hour format, a PM softkey is available if the wakeup is AM, or
for afternoon wakeup times. If system time is in
24-hour format, the PM softkey does not appear.
Wakeup = 09&P
Time must always be entered as four digits if the wakeup is PM.
(hh:mm). The system does not accept an invalid
setting, but gives no error message.
If a wakeup is set or changed by the console, and
the system option to print these changes has been
enabled, a SEr BY CON or CHG BY CON message
is printed to indicate how the change was made.
Front Desk If no wakeup time is set for a room, the Set Wake Wakeup time is entered,
rerminal
Up softkey is displayed. If a wakeup time is set for a
room, a Set Wake Up and a Clear Wake Up softkey
changed, and displayed in
the Wake Up Ttme Field on
are displayed.
When the Set Wake Up softkey is pressed, all
the Guest Room Update
screen.
softkeys are cleared and a prompt to enter the If the 24-hour clock system
wakeup time is displayed. Only the number keys, option is enabled, the
up/down arrow keys, and the Delete and Return
wakeup time is displayed in
hardkey are valid when setting the time. Time must
24-hour format. If the
be entered as four digits (hh:mm), 24-hour clock system option
is not enabled, the wakeup
time is displayed in 12-hour
format with an AM/PM
indication.
The Search Display screen
displays wakeup time for a
guest room (ii set),
Each digit is validated as it is entered. Any digit is
accepted that could be a valid time setting. A
24-hour setting is accepted as valid in the 12-hour
mode: it is automatically converted to 12-hour
format when displayed. Any time entered in a
12-hour format is taken to be AM and is displayed
with AM appended.
9109-096-602-NA
Issue 1
Revision 0 602 2-33