Attendantnewcallring; Attendant Night/Day Switching - Mitel SX-200 Practices

Features
Attendant New Call Ring
Description
.,
If an attendant is already actively engaged with an incoming call, the first
call placed in the attendant call waiting queue signals the attendant with a
single burst of ringing. Subsequent calls do not alert the attendant when
they are added to the queue. Their presence is shown by the call waiting
indication on the top line of the display; see Attendant Calls Waiting Dis-
Play*
Conditions
The following conditions apply to this feature:
l
This feature is disabled if the attendant bell is turned off from the con-
sole. Refer to Attendant
Bell Off.
l
This feature is disabled if TONES ON is on.
Programming
Enable COS Option 106 (Attendant New Call Tone) for the console.
Operation
None
Attendant Night/Day Switching
Description
The Attendant may select NIGHT1 service, NIGHT2 service, or DAY ser-
vice via softkeys; also see Night Services.
Conditions
The following conditions apply to this feature:
l
When NIGHT1 or NIGHT2 has been selected by an Attendant Con-
sole, the status is displayed on the righthand side of the destination
line of the display for all affected consoles.
l
The console switches service for tenants controlled by that console;
refer to CDE Form 06 (Tenant Night Switching Control) and to Practice
9109-096230-NA, Tenanting.
Programming
Refer to Night Services and to Tenanting.
Operation
To switch to NIGHTI, NIGHT2, or DAY service, select the following keys:
l
FUNCTION
l
NIGHT 1 or NIGHT 2 or DAY SERVICE
9109-09~105-NA Issue 1 Revision 0 105 2-45