Mitel SX-200 Practices page 170

Features Description
To cancel Forwarding (all types):
Lift the handset -wait for dial tone.
Dial Call Forwarding All Calls access code.
Hang up - the forwarding is canceled, or,
Lift the handset - wait for dial tone.
Dial the Clear All Features access code (see Clear Al Features). This
also cancels all forwarding at the telephone.
SUPERSET
Telephones:
;
To select Call Forwarding - Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
SUPERSET DN
and SUPERSET Telephones:
To set up Call Forwarding - Don' t Answer:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the
Speaker On/Off
key to go on-hook.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature key, if programmed. The LCD indi-
cator is dark (activated) to indicate forwarding active, clear to indicate
not active.
SUPERSET 4
Telephones:
To display the current Forwarding type and destination:
.
.
_
.
To
.
.
Press the DISPLAY key.
Press the CALL FWD softkey - read the display (if Split Forwarding is
enabled, press the NEXT softkey).
Press the EXIT softkey.
activate Forwarding already programmed:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Note:
If Split
Forwarding is enabled, press the NEXT softkey to examine
settings for
internal calls.
l
Press the ON softkey to activate forwarding; if activation is not desired,
press the EXIT softkey.
105 2-98
Revision 0 9109-096-l
05-NA
Issue
1