Mitel SX-200 Practices page 183

Features
SUPERSE7420 Telephones:
To display the current forwarding type and destination:
.
.
.
.
.
Press
SuperKey.
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
Press the Yes softkey. The display shows the current forwarding type
and destination, if programmed.
UCTERNAL CALLS? * appears in the display. The asterisk (*) is pres-
ent only if call forwarding is on.
Press the
Review
softkey to display the current call forwarding setting
for the external incoming calls that arrive at your set.
Press the Next sofkey. INTERNAL CALLS? * appears in the display.
The asterisk (*) is present only if call forwarding is on.
Press the
Review
softkey to display the current call forwarding setting
for the internal calls that arrive at your set.
Press
SuperKey
to return to normal display.
To activate call forwarding if it is already programmed:
.
.
.
.
.
9109-096-105-NA
Issue
1
Press the CALL FORWARD Feature key. The indicator beside the key
turns on to indicate that Call Forwarding is activated. Note that if both
External and Internal call forwarding are programmed, both will be en-
abled. (Refer to Feature Keys for instructions on programming this
feature key.)
or, you can activate either external forwarding, internal forwarding, or
both using the softkeys.
To activate external forwarding using the sofikeys:
Press
SuperKey.
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
Press the Yes softkey.
DCTERNAL CALLS? appears in the display.
Press the
Change
softkey. The current call forwarding setting for ex-
ternal incoming calls is displayed
Press the
TurnOn
softkey.
Press
SuperKey
to return to normal display.
To activate internal forwarding using the softkeys:
Press
SuperKey
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
Revision
0
105 2-111