Mitel SX-200 Practices page 748

Hotel/Motel Feature Packaoe Describtion
Room Status
Feature Description:
Reference page 602 254.
User Information:
Console: Chart 5-l I. Front Desk Terminal: Chart 5-SO; Telephones:
See Chart 4-20,
Chart 4-l 9 Setting up Room Status
Notes:\ 1. If System Option 02 (Message Lamp Test Enable) is enabled, when a room's status is
changed from vacant to occupied or from occupied to vacant, the system performs a
message lamp test on the telephone in that room. If the test finds the lamp defective
(i.e. burnt-out or missing), it raises a minor alarm.
2. System Option 56 (Room Status Conversion/Auto Wakeup Print lImer) only applies if
System Option 34 (Auto Room Status Conversion/Auto Wakeup Print) is enabled.
Step
Action Comments
Form 03
I. Select COS option 244 (Room Status
Applies) for all extensions for which room
status is to apply.
Form 04
2. Enable System Option 02 (Message Lamp
This global option applies to the attendant
Test Enable) to allow message lamp testing.
console only.
Enable System Option 33 (Room Status).
Select System Option 34 (Auto Room Status
Optional.
Conversion/Auto Wakeup Print). See Note 2.
602 4-28
Revision 0
9109-096-602-NA
Issue 1