Mitel SX-200 Practices page 191

Features
To
.
.
.
.
.
cancel Forwarding (all types):
Lift the handset -wait for dial tone.
Dial any forwarding access code.
Hang up -the forwarding is canceled.
or
Lift the handset - wait for dial tone.
Dial the Clear All Features access code (see
Clear A// Features). This
also cancels all forwarding at the telephone.
<
SUPERSET3
Telephones:
To select Forwarding (all types except I' m Here):
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key.
SUPERSET
DN Telephones:
To set up Call Forwarding - Busy:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to go off-hook using the SPEAKER ON/OFF key.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature access key, if programmed. The
LCD indicator is dark (activated) to indicate forwarding active, clear to
indicate not active.
SUPERSET Telephones:
To
To activate Forwarding already programmed:
.
display the current Forwarding type and destination:
Press the DISPLAY key.
Press the CALL FWD softkey - read the display.
Press the EXIT softkey.
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
9109-096-l 05-NA
Issue 1
Revision 0 105 2-119