Mitel SX-200 Practices page 233

Features
Programming
Enable COS Option
400
(Contact Monitor) for the extension.
Operation Close
the contact and a call is made to the Dial 0 Routing point or to the
Priority Dial 0 Routing point.
Customer Data Entry
Description
Conditions
None.
Programming Refer to Practice 9109-096-210-NA, Customer Data Entry, for detailed
programming information.
Operation
None.
Customer Data Entry is a full screen application, using softkey prompts
and simple graphics, for entering and changing customer programming.
Enter customer data from a terminal via the RS-232 connector on the
Maintenance panel or the rear of the Universal Control cabinet, or from an
Attendant Console (a screen of reduced height is used).
Customer Data Entry can also be performed from a remote location, using a
terminal connected to the PABX via modems.
Customer Data Entry - Default Data
.
Description
Conditions
Programming
Operation
The system is preprogrammed with default Class-Of-Service (COS) Op-
tions and Class-Of-Restriction Options; if no alternates are programmed,
the system defaults to the preprogrammed data. The Feature Access
Codes can be entered during Customer Data Entry.
None
Refer to Practice 9109-096-210-NA, Customer Data Entry.
Default data in the database includes:
l
Device Interconnection Table
9109-096-l 054A
issue 1
Revision 0
105 2-161