Mitel SX-200 Practices page 115

m I
._ ._
Features
only the console that set Message Waiting for aspecific station can review or
cancel it. Also see Attendant Transparent Multi-console Operation.
A message may also be setup and cancelled from the Front Desk. See
Practice 9109-096-602-NA, Hotel / Motel Feature Package Description.
Conditions
The following conditions apply to this feature:
l
If either message waiting COS Option is enabled, the extension rings
every 20 minutes when idle, or until the message waiting is canceled.
If the message waiting indication is given by a lamp, the lamp flashes
(at 60 ipm).
l
If the message waiting indication is given by ringing the extension, the
first ring starts IO seconds after the extension becomes idle.
l
The message waiting lamp or display indicator on SUPERSETtele-
phones is always lit for any message irrespective of COS options.
l
If the extension has Do Not Disturb enabled, the ringing indication is
not given.
9 All consoles with this feature must be in the same tenant, and have
COS Option 320 (Transparent Multi-Console Operation) enabled.
l
Any console within this tenant with COS Option 320 (Transparent Mul-
ti-console Operation) enabled may cancel Message Waiting, instead
of just the console that set it.
Programming
Enable COS option 232 (Message Waiting Setup - Lamp) and/or COS
Option 231 (Message Waiting Setup - Bell) for each extension on which
the console is to place a message.
COS Option 231 enables ringing at an extension; both COS Option 231 and
COS Option 232 enable ringing at a SUPERSETtelephone.
Enable COS Option 320 (Transparent Multi-Console Operation) for each
console that is to operate in Transparent Multi-Console Operation mode.
Operation
To set up Message Waiting on an extension, perform the following proce-
dure:
0 Press the FUNCTION key.
l
Press the ATT FUNCTION softkey.
l
Press the STATIONS softkey.
l
Enter the extension number.
l
Press the SEND MSG softkey.
9 Press the EXIT softkey.
or
9109-096-l 05-NA
Issue 1 Revision 0 105 2-43