Receivers; Universal Cards - Mitel SX-200 Practices

9109496-625-NA Issue 1 Revision 0
625 6-l
6
' INSTALLATION
The Automated Attendant feature may require additional receivers to prevent
complaints from users about a delay to dial tone, The following subsections describe
the installation requirements for the Automated Attendant feature:
Rkeivers
;
\
6.1 Ensure system is provisioned with sufficient DTMF receivers. Traffic measurement
can be used to monitor receiver usage and identify failures to get a receiver.
Universal Cards
6.2 Each Universal Card can contain up to 16 receivers and Universal Cards can only be
installed in high-powered slots. This may present a problem for a 480-port machine
that is limited to six high-powered slots.