Mitel SX-200 Practices page 198

Features Description
9 Press the DISPLAY key.
l
Press the CALL FWD softkey - read the display.
l
Press the EXIT softkey.
To activate Forwarding already programmed:
. Press the SELECT FEATURES key.
. Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
"
and destination are displayed.
l
Press the ON softkey to activate forwarding; if activation is not de-
sired,press the EXIT softkey.
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
To deactivate Forwarding:
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
To Set Up or Modify Call Forwarding - Follow Me:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until Call Forwarding - Follow Me is displayed; then press the YES
softkey.
.
.
-
.
Dial the forwarding destination, or press a Speedcall key.
Check the number on the display.
- To correct an error, use the f- key.
Press the SAVE softkey when the correct destination is displayed.
SUPERSET DN Telephones:
To display the current forwarding type and destination:
.
105 2-126
Press
SuperKey.
Find the
Forwarding
softkey. (Use the
More
softkey).
Press the
Forwarding
softkey. The display shows the current forward-
ing type and destination, if programmed.
Press
SuperKey
to return to normal display.
Revision 0 9109-096-l 05-NA
issue 1