Mitel SX-200 Practices page 181

Features
Dial the number to which calls are to be forwarded.
Dial tone returns.
Hang up -the extension is available for normal use.
To set up Call Forwarding for externally originated calls:
l
Lift the handset -wait for dial tone.
l
Dial Access code 05 - Call Forwarding - External Calls Only
l
Dial the Condition code for the desired type of forwarding.
l
Dial the number to which calls are to be forwarded.
l
Dial tone returns.
l
Hang up -the extension is available for normal use.
To cancel Forwarding (all types):
.
.
Lift the handset -wait for dial tone.
Dial the external forwarding access code.
Hang up - external forwarding is canceled.
Dial the internal forwarding access code.
Hang up - internal forwarding is canceled.
or
Lift the handset-wait for dial tone.
Dial the Clear All Features access code (see
Clear Al Features).
This
also cancels all forwarding at the telephone.
SUP ERSET 3 Telephones:
To select Call Forwarding:
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the Speaker On/Off key to go on-hook.
SUPERSET DN and SUPERSET Telephones:
To set up Split Call Forwarding (all types except I' m Here):
l
Follow the same procedure as for industry-standard telephones; it is
also possible to dial the codes and extension destination directly on
the keypad and then press the Speaker On/Off key to go on-hook.
To activate or deactivate Forwarding already programmed:
l
Press the CALL FORWARD feature access key, if programmed. The
LCD indicator is dark (activated) to indicate either internal or external
forwarding active, clear to indicate not active.
9109-096-I
05-NA
Issue 1
Revision 0 105 2-109