NOTE: The auger damper is longer than the auger spring.
1
Push and twist the auger damper until it
stops at the end of the auger tube.
Figure 5 Installing the insert
2.
Ensure that the shutter assembly is positioned correctly on the support bracket.
3.
Support the auger tube when locating the shutter assembly and bracket onto the auger
tube, Figure 6.
WorkCentre 5687 Family
2
Ensure that the shutter is
positioned correctly on the
bracket
Figure 6 Shutter and bracket position
August 2007
4-171
1
Support the auger tube
Repairs/Adjustments
REP 9.10