Xerox WorkCentre 5687 Series Service Manual page 1261

3
Remove 3 screws
marked A.
2
1
Remove E-clip and bearing
Remove E-clip and
flag.
Figure 2 Rear preparation
4. Figure 3, prepare the front components.
WorkCentre 5687 Family
1
Remove E-clip and bearing.
5. Ensure that the compiler ejector is fully to the left (home position).
6. Figure 4, remove the paddle wheel shaft assembly.
August 2007
4-241
2
Remove 3 screws
marked A.
Figure 3 Front preparation
Repairs/Adjustments
REP 11.10-120