Xerox WorkCentre 5687 Series Service Manual page 1277

Figure 2 Compiler input guide
7. Remove the staple head cover (one screw), PL 11.46 Item 12.
8. Disconnect the stapler harness from the compiler PWB at PJ414 and the ground connec-
tor, cut the tie wrap.
9. Figure 3, remove the compiler staple head assembly.
WorkCentre 5687 Family
3
Push guide to
the right
2
Remove 2
screws
1
Unhook spring
2
Remove the
staple head
10. Figure 4, remove the SH1 paper sensor.
August 2007
4-257
Figure 3 Staple head removal
Repairs/Adjustments
REP 11.3-130
1
Remove
two
screws