Xerox WorkCentre 5687 Series Service Manual page 1522

REP 11.47-171 HVF Top Exit Feed Roll
Parts List on PL 11.155
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. If fitted, undock the PPI, REP 11.82-171.
2. Remove the HVF front door, REP 11.1-171.
3. Remove the HVF top cover, REP 11.1-171.
4. Remove the HVF front cover, REP 11.1-171.
5. Remove the HVF rear cover, REP 11.1-171.
6. Figure 1. Raise the top tray and lower the plate beneath it.
Figure 1 Lowering the plate.
Repairs/Adjustments
REP 11.47-171
7. Figure 2. Remove the circlip and bush. Remove the front magnet bracket screws.
1
1
Release the
Remove the circlip and
two links
the bush
2
Lower the plate
August 2007
4-502
2
Remove 2 screws
Figure 2 Feed Roll Front Fasteners.
WorkCentre 5687 Family