Xerox WorkCentre 5687 Series Service Manual page 1431

REP 11.53-170 CC Shutter and Springs
Parts List on PL 11.73
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the CC eject housing assembly, REP 11.57-170.
2. Figure 1, remove the CC shutter.
WorkCentre 5687 Family
5
Release the pin
from the front
and remove the
shutter
Figure 1 Shutter removal
Replacement
Reverse the removal procedure to replace the CC shutter.
August 2007
4-411
2
Slide the shutter
to the front,
release the pin
from the rear
3
1
Unhook the
Remove the
springs from
screw
the shutter
4
Un-snap the middle fixings
Repairs/Adjustments
REP 11.53-170