Table of Contents
Advertisement
ADJ 11.1-171 Machine to HVF / HVF BM Alignment
Purpose
To correctly align the HVF / HVF BM to achieve reliable transfer of paper from the machine.
Adjustment
Turn the hand wheels above the castors at the right of the HVF / HVF BM to adjust the align-
ment:
•
Figure 1, turn both hand wheels in the same direction to adjust the vertical alignment
between the HVF / HVF BM and the machine viewed from the front or rear.
Figure 1 Machine to HVF BM alignment
WorkCentre 5687 Family
ADJ 11.2-171 Tri-Folder Paper Settings
Purpose
The purpose of the procedure is to place the fold in the correct position on 8.5 x 11 inch and A4
paper.
Check
1.
Ensure that the tri-folder is at the same height as the HVF, Figure 3.
2.
Run a copy job 4 sheets and check that the folds are in the correct place.
3.
The paper should be folded into three equal parts and the folds parallel to the edge of the
paper. If necessary perform the adjustment.
Adjustment
1.
Remove the front door, PL 11.190
2.
Remove the front cover, PL 11.190
3.
Remove the rear cover, PL 11.190
4.
Set the folder to the appropriate paper size:
•
To set the folder for A4 paper, Figure 1.
•
To set the folder for 8.5 x 11 inch paper, Figure 2.
At the front
Loosen the screw and move the
adjuster to the A4 setting
Figure 1 A4 paper setting
August 2007
4-669
At the rear
Loosen the screw and move the
adjuster to the A4 setting
Repairs/Adjustments
ADJ 11.1-171, ADJ 11.2-171
Hide quick links:
Advertisement
Chapters
Table of Contents
