11N-171 Chad Bin Present and Bin Full RAP
Use this RAP when there is a false indication of a missing or full chad bin.
Initial Actions
Check that the chad sensor hole in the side of the bin is clear of obstruction. Check that the bin
is fully inserted and is empty.
Procedure
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Figure 1 shows the location of the components.
UNDERSIDE VIEW
Figure 1 Component location
Enter dC330 code 11-112, chad bin present sensor. Remove the chad bin and operate the sen-
sor manually. The display changes.
Y
N
Go to Flag 1 and check the wiring. Repair as necessary, REP 1.2. Check the chad bin
present sensor, Q11-112. Refer to:
A
Status Indicator RAPs
11N-171
A
•
GP 11 How to Check a Sensor.
•
P/J501 on the HVF PWB.
•
11A-171 HVF Power Distribution RAP.
As necessary, install new components:
•
Chad bin present sensor, Q11-112, PL 11.153.
•
HVF control PWB, PL 11.157.
Enter the dC330 code, 11-348, chad bin full sensor. Remove the chad bin and activate the sen-
sor with paper. The display changes.
Y
N
Go to Flag 2 and check the wiring. Repair as necessary, REP 1.2. Refer to:
•
GP 11 How to Check a Sensor.
•
P/J501 on the HVF PWB.
•
11A-171 HVF Power Distribution RAP.
Install new components as necessary:
•
Chad bin full sensor, Q11-348, PL 11.153.
•
HVF control PWB, PL 11.157.
Perform SCP 6 Final Actions.
Chad bin full sensor,
Q11-348
Chad bin present
sensor, Q11-112
August 2007
2-664
WorkCentre 5687 Family