Xerox WorkCentre 5687 Series Service Manual page 1280

3
Lift PWB from retainers
Figure 2 Carriage PWB removal
Repairs/Adjustments
REP 11.4-130
2
Remove screw
1
Disconnect all con-
nectors on the PWB
August 2007
4-260
Replacement
Reverse the removal procedures to replace the carriage PWB. Ensure the harness cover
removed in Figure 1, is correctly installed so that it does not interfere with jam clearance latch
5d.
CAUTION
Figure 3. When securing the harness to the support, ensure that the harness cannot be dam-
aged when the compiler carriage moves between the upper and lower limits.
Figure 3 Harness position
Harness must
clear this plate
Harness must
clear this support
WorkCentre 5687 Family