Xerox WorkCentre 5687 Series Service Manual page 1337

3
Remove the cover
2
Slide the cover to the rear to align
with the notch
Figure 2 Cover removal
4. Figure 3, remove the nip shaft, nip springs and nip rolls.
WorkCentre 5687 Family
1
Remove 2 screws
3
Slide the rolls off the shaft
Replacement
Reverse the removal procedure to replace the nip shaft, nip springs and nip rolls.
August 2007
4-317
2
lift out the nip shaft with rolls
Figure 3 Nip shaft removal
Repairs/Adjustments
REP 11.40-130
1
Remove 2
springs