ADJ 7.1 Tray 3 and Tray 4 Paper Tray Guide Setting
Parts List on PL 7.17
Purpose
To adjust the paper tray guide in tray 3 and tray 4 for A4 or 8.5 x 11 inch paper.
Adjustment
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1.
Pull out the tray to be adjusted and remove the paper from the tray.
2.
Push in the retaining clips and remove the paper tray guide, PL 7.15 Item 20, Figure 1.
Figure 1 Remove the paper guide
3.
To reset the paper tray guide:
•
Go to Figure 2, to set the paper tray guide to A4 paper size and reposition the retain-
ing clips.
•
Go to Figure 3, to set the paper tray guide to 8.5 x 11 paper size and reposition the
retaining clips.
WorkCentre 5687 Family
Retaining clips
August 2007
4-627
Figure 2 Set the paper guide to A4 size
Retaining clip
Repairs/Adjustments
ADJ 7.1