Xerox WorkCentre 5687 Series Service Manual page 1542

10. Figure 4, remove the grease roll gate front guide.
Figure 4 Front guide removal
Repairs/Adjustments
REP 11.59-171
3
Hold the baffle
4
away from the
Remove
guide
the guide
2
Remove screw
1
Remove two
screws
August 2007
4-522
11. Figure 5, remove the grease roll gate rear guide.
4
3
Remove Hold the baffle
the guide
away from the
guide
2
Remove screw
1
Remove two screws
Figure 5 Rear guide removal
12. Loosen 3 screws to remove the crease roll gate shaft from the crease roll gate.
Replacement
Reverse the removal procedure to replace the crease roll gate assembly.
CAUTION
Ensure that the crease roll gate shaft is positioned centrally within the crease roll gate.
WorkCentre 5687 Family