Table of Contents
Advertisement
1K and 2K LCSS Bin 1 Elevator Motor Worm and Gear
1.
Remove the 1K LCSS top cover and rear cover, REP 11.1-120 or the 2K LCSS top cover
and rear cover, REP 11.1-110.
2.
Figure 8, use plastislip grease, PL 26.10 Item 8, to lubricate the worm and gear.
NOTE: The lubrication procedure is the same for the 1K LCSS and the 2K LCSS. The 1K
LCSS is shown in Figure 8.
Apply grease to the
worm and gear
Figure 8 Lower vertical slides
Repairs/Adjustments
ADJ 4.1
1K and 2K LCSS Tamper Assembly
1.
Remove the 1K LCSS top cover, REP 11.1-120 or the 2K LCSS top cover, REP 11.1-110.
2.
Figure 9, use plastislip grease, PL 26.10 Item 8, to lubricate the tamper assembly.
NOTE: The lubrication procedure is the same for the 1K LCSS and the 2K LCSS.
Figure 9 Lower vertical slides
HCSS / HCSS BM Compiler Carriage Eject Housing Pivots, Shutter
Pins and Tracks
Parts list on: PL 11.47 (HCSS), PL 11.73 (HCSS BM)
1.
Remove the CC shutter, REP 11.39-130 or REP 11.53-170.
2.
Figure 10, use plastislip grease, PL 26.10 Item 8, to lubricate the compiler carriage eject
housing pivots, shutter pins and guide tracks.
August 2007
4-608
Apply grease to the
shaft
WorkCentre 5687 Family
Hide quick links:
Advertisement
Chapters
Table of Contents
