Xerox WorkCentre 5687 Series Service Manual page 1556

REP 11.67-171 Tri Folder Covers
Parts List on PL 11.190
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the screw and front door hinge pin then move the door from the upper pivot.
Remove 4 screws and remove the front cover Figure 1.
Figure 1 Tri-folder Front Door and Cover
2. Remove the rear cover, the top cover and the right side cover as required, Figure 2.
Repairs/Adjustments
REP 11.67-171
NOTE: Open the top cover and remove the rear cover to access to the top cover rear fas-
teners and the top cover interlock sensor PJ.
Open the front door to
access the top cover
front fasteners
Figure 2 Top, Rear and Right side covers
Replacement
Reverse the removal procedures to reinstall the Tri Folder covers.
August 2007
4-536 WorkCentre 5687 Family