Xerox WorkCentre 5687 Series Service Manual page 1536

7. Figure 2, remove the BM right hand cover.
Figure 2 Cover removal
Replacement
Reverse the removal procedure to replace the BM right hand cover.
Repairs/Adjustments
REP 11.56-171, REP 11.57-171
REP 11.57-171 HVF Main PWBA
Parts List on PL 11.157
2
Removal
Disconnect the
harness and
remove the cover
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the rear cover REP 11.1-171.
2. Disconnect the PJs, remove 9 screws and remove the PWB assembly, Figure 1.
1
Lever the cover
free of the detents
Replacement
Reverse the removal procedures to replace the HVF Main PWBA.
August 2007
4-516
WARNING
WARNING
Figure 1 HVF Main PWB
WorkCentre 5687 Family