Table of Contents
Advertisement
OF4 Status Codes and Messages RAP
Use this RAP for faults and messages without fault codes.
The status code numbers are in the series XX-5XX. However a shortage of 500 series num-
bers means that occasionally other numbers must be used, for example; XX-6XX and XX-9XX.
The first two digits identify the relevant functional chain link number. Refer to GP 2 Fault Codes
and History Files.
Status codes are used to call up UI status messages and are displayed in the Active Messages
Log. Most recent fault and status codes can be displayed on the UI without entering diagnos-
tics, by pressing the Machine Status button on the keypad, touching the Fault tab on the UI,
then select as appropriate:
•
All Faults.
•
Active Messages - status codes and a status message.
•
Error Log - fault codes.
The tables in this procedure bring together the status codes, the relevant RAP or procedure
references, and some of the UI messages.
NOTE: Not all status codes are shown in the active message window. Some status codes have
no messages.
Procedure
Enter the Fault Codes and History Files, GP 2 and identify and clear any active faults. Go to
the following RAPs to identify a status code or message:
•
OF4a Status Codes in Numerical Order
•
OF4b Status Messages in Alphabetical Order
WorkCentre 5687 Family
OF4a Status Codes in Numerical Order
Status Message Tables
•
Table 1 01-5XX Status codes
•
Table 2 02-5XX Status codes
•
Table 3 03-5XX Status codes
•
Table 4 04-5XX Status codes
•
Table 5 05-5XX Status codes
•
Table 6 06-5XX Status codes
•
Table 7 07-5XX Status codes
•
Table 8 08-5XX Status codes
•
Table 9 09-5XX Status codes
•
Table 10 10-5XX Status codes
•
Table 11 11-5XX Status codes
•
Table 12 12-5XX Status codes
•
Table 13 14-5XX Status codes
•
Table 14 16-5XX Status codes
•
Table 16 19-5XX Status codes
•
Table 17 20-5XX Status codes
•
Table 18 22-5XX Status codes
Table 1 01-5XX Status codes
Status
Code
UI Message
01-510
Close front door
01-512
Close left hand door
01-514
No message
01-550
No message
Table 2 02-5XX Status codes
Status
Code
UI Message
02-530 The User Interface is not
available. Please call for
assistance
02-531 Local interface problem
detected. Please switch
the machine off and on
again
August 2007
2-739
Reason for Message
Reference / Action
Front door open
Perform 01-300 RAP
Left hand door open
Perform 01-305 RAP
Finisher bin 0 cover open
Perform 11-301-170, 11-
302-170 for HCSS BM
System in power save mode Used internally by the
network controller
Reason for Message
Reference / Action
Fault detected at UI. Local UI
Perform 02-320, 02-380
needs service
RAP
Faults declared. UI running in
Perform 02-309, 02-390,
degraded mode
02-391, 02-704, 02-706
RAP
Status Indicator RAPs
OF4, OF4a
Hide quick links:
Advertisement
Chapters
Table of Contents
