Xerox WorkCentre 5687 Series Service Manual page 1567

REP 11.81-171 TF Main and Bin 2 Tray Harnesses
Parts List on PL 11.193
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the Tri Folder rear cover, REP 11.67-171. If removing the TF main harness,
remove the HVF rear cover, REP 11.1-171.
2. Disconnect the PJs and remove the main and Bin 2 tray harnesses, Figure 1.
WorkCentre 5687 Family
Bin 2 Harness
Figure 1 TF Main and Bin 2 Tray Harnesses
Replacement
Reverse the removal procedures to replace the main and bin 2 tray harnesses.
August 2007
4-547
TF Main Harness
Bin 2 Harness PJ
Repairs/Adjustments
REP 11.81-171